发动机车床
首页 > 产品 > 发动机车床 > CW61100C Engine Lathe

CW61100C Engine Lathe

The guide rail of the lathe bed is quenched and finely ground by ultra audio frequency, with long service life. The gear is precisely ground, and the noise of the whole machine is low.

The spindle system has good rigidity and high precision.

The chute box is equipped with a fast forward and fast backward mechanism.

The headstock is equipped with a hydraulic clutch mechanism, which can start smoothly and brake quickly.


产品参数



TECHNICAL SPECIFICATIONS
ItemModelCW61100C/CW62100CCW61125C/CW61125C/CW62125CCW61140C/CW62140C
Max.swing diameterOver bed∅1000mm∅1250mm∅1400mm
Over carriage∅600mm∅865mm∅1015mm
In gap(Only for 62 series)∅1380mm∅1750mm∅1900mm
Width of bed755mm
Max.length of workpiece1.5/2/3/4/5/6/8/10/12m
Maximum turned length1.3/1.8/2.8/3.8/4.8/5.8/7.8/9.8/11.8m
Effective gap length590mm
Max.weight of work piece(between centers)5000kg
SpindleSpindle noseA2-5
Spindle bore∅130mm
Taper of boreMetric ∅140 1:20
Number of speeds24(正Normal)    12(反Reverse)
Range of speeds2.5-250r/min
Pitch of longifndinal ball screw/diameter12mm/∅70mm
Number of longifudinaland cross leeds97
Fead range of Longitudinal0.1-12mm/r
Cross0.05-6mm/r
Middle tool post0.025-3mm/r
Thread cultingMetric range/No1-120mm/45
Inch range/No30-1/4T.P.I/42
D P. Range/No0.5-80D.P/48
Module range/No1/2-60M.P/46
Rapid traverseLongitudinal3740mm/min
Cross1870mm/min
Middle tool post935mm/min
Tailstock sieeveExternal diameter∅160mm
Taper of boreMetric ∅80
Max.traverse300mm
Verical distance from spindle center to installing basis  41mm51mm
Swing angle of tool post±90°
Max.travel of middle tool post400mm
Max.travel of top slide
200mm
Max.travel of cross slide 720mm
Max.size of tool shank(W×H)40×40mm50×50mm
Power oi main motor(double speeds)22KW注:●可选配
Rapid feed motor power1.5KW
Cootant pump power0.25KW
3m machine overall dimensions(L×W×H)6000×1880×1700mm6000×1880×1825mm6000×1860×1900mm
Net weight(3m)11200kg12000kg12500kg
OptionalSteady rest
Follow rest○不可选配
ProtectionChuck guard○ ○ ○ 
Tool post guard
Leadscrewguard
Note:For each additional machine length of 1m.there will be additional net weight of 1100kg.
Above specifications can be customized against clients' request.       


All specifications are subject to our final confirmation.                                                                            




相关产品


          

          
        
WeChat
WeChat