C6250B Engine Lathe

The guide rail of the lathe bed and the gear of the headstock are hardened and precisely ground, with long service life and low noise.

Main shaft through hole ∅ 80mm, good rigidity and high precision of main shaft system.

The chute box is equipped with a fast forward and fast backward mechanism.

下一个产品询盘

产品参数

TECHNICAL SPECIFICATIONS
Item			Model	C6250B	C6266B
Max.swing diameter			Over bed	∅500mm	∅660mm
			Over carriage	∅310mm	∅420mm
			In gap	∅720mm	∅870mm
Width of bed				405mm
Max.length of workpiece				1000/1500/2000/3000mm
Maximum turned length				850/1350/1850/2850mm
Spindle		Spindle nose		D8
		Spindle bore		∅80mm
		Taper of bore		M.T.No.7
		Number of speeds		24 Steps
		Range of speeds		9-1600r/min
Thread culting		Metric range/No		1-224mm/46
		Inch range/No		28-1/8T.P.I/46
		D P. Range/No		56-1/4D.P/45
		Module range/No		0.5-112M.P/42
Range of feeds		Longitudinal		0.063-6.43(0.0023〃-0.2392〃)
		Cross		0.027-2.73(0.0010〃-0.1016〃)
Rapid traverse		Longitudinal		4.5m/min
		Cross		1.9m/min
Tailstock sieeve		External diameter		∅75mm
		Taper of bore		M.T.No.5
		Max.traverse		150mm
Max.travel of top slide				145mm
Max.cross slide travel				340mm	360mm
Max.size of tool shank(W×H)				25×25mm
Power oi main motor(double speeds)				7.5KW		注：●可选配
Overall dimensions(L×W×H)				2500/3000/3500/4500×900×1259mm	2500/3000/3500/4500×1100×1450mm
Net weight				2750/3000/3250/3600kg	3000/3200/3400/3900kg
Optional	Steady rest			●
	Follow rest			●		○不可选配
	Protection	Chuck guard		●
		Tool post guard
		Leadscrewguard
Above specifications can be customized against clients' request.
All specifications are subject to our final confirmation.